华人彩网址

          <dfn id='Xhpkbz'><optgroup id='Xhpkbz'></optgroup></dfn><tfoot id='Xhpkbz'><bdo id='Xhpkbz'><div id='Xhpkbz'></div><i id='Xhpkbz'><dt id='Xhpkbz'></dt></i></bdo></tfoot>

          <ul id='Xhpkbz'></ul>

          • Full automatic high speed stringer

            Technical Parameter

            Throughout

            4000cell/h

            Cell size

            125*125/156*156/156*78/125*62.5

            Cell thickness

            160um~300um

            Numbers of busbar

            125/2BBand156/3BB 4BB 5BB 6BB, changeover time 1 hour, need to replace part of module

            Width of busbar

            0.8-3.2mm,different changeover time according to different size<30min(including the adjustment time after changeover)

            Thickness of ribbon

            0.18-0.32mm

            Position accuracy of ribbon

            ±0.2mm

            Flux coating method

            Ribbon smear method

            Soldering method

            Infrared heating,

            (with auxiliary bottom plate heater, position adjustable)

            Breakage rate

            ≤0.2% (excluding cell source problem)

            Offset rate

            <0.3%,>0.3mm is as offset subject to busbar line center

            Cell string length

            2000mm(1-12pcs)

            Straightness tolerance of cell string

            ±0.5mm

            Total length tolerance of cell string

            ±0.5mm

            Cell gap

            0.5-50mm

            Cell position method

            CCD detection and robot position

            Cell string transmission

            Teflon transmission belt, driven by servo motor

            Cell defect detection type

            Side Tear/Corner Tear/Crack/Cell reversal /Surface stain

            Laying out method

            Bidirectional lay-off,connected to layup machine automatically/manual layup

            Battery string online testing

            Lu Bai, lobes, film spacing, dirty, broken gate, foreign body, starting from the solder joints

            HMI

            Integrated touch screen IPC with cantilever operation box and English/Chinese interface.

            Equipment uptime

            ≥95%

            Electric system

            PLC plus servo system

            Power supply

            AC380V±5%V,50Hz,Three-phase-five-wire Power supply capacity 25KVA

            CDA pressure

            0.6-0.8MPa

            CDA usage

            40m3/h/set

            Dimension

            (Excluding touch screen and cantilever beam)

            Weight

            4500kg

            The KFWⅣ-H type stringer of ConfirmWare is capable to solder monocrystalline/polycrystalline solar cell string, adaptable for 125*125 and 156*156 sized full cell and half cell, compatible with 2BB-6BB. This equipment adopts various kinds of advanced automation technology such as PLC, servo, manipulator, machine vision etc. It can realize the whole process from cell loading to unloading automatically, the designing capacity is 4000 pieces/hour.